The paper has taken a fundamental approach to study the nano-scale deformation behavior of Al-Al2O3 cermet coatings deposited by low-pressure cold spraying (LPCS) on AZ31 magnesium and Al6056 lightweight alloy substrates. Coating microstructural characteristics were first evaluated and correlated with LPCS process parameters using metallurgical characterization techniques: SEM, 3D optical profilometry, and XRD, followed by their microhardness and wear depth measurements and comparing with uncoated substrates under three-body abrasion wear. These properties were analyzed/mapped against probable deformation scenarios for nano-scale yield strength determination using the combined experimental nanoindentation load-depth curve method and computational expanding cavity models (ECMs). Obtained yield strength with key coating parameters like hardness and Young’s modulus were taken for modeling and simulation of strain-hardening effect under a peak loading of 165 mN in ABAQUS finite element (FE). Results from both combined experimental/computational and FE approaches indicate a progressive elasto-plastic mode being the dominating coating deformation mechanism with a strain hardening exponent of 0.15, under the studied loads.
Investigation of strain-hardening characteristics of cold-sprayed Al–Al2O3 coatings: a combined nanoindentation and expanding cavity models approach
Viscusi A.;
2020-01-01
Abstract
The paper has taken a fundamental approach to study the nano-scale deformation behavior of Al-Al2O3 cermet coatings deposited by low-pressure cold spraying (LPCS) on AZ31 magnesium and Al6056 lightweight alloy substrates. Coating microstructural characteristics were first evaluated and correlated with LPCS process parameters using metallurgical characterization techniques: SEM, 3D optical profilometry, and XRD, followed by their microhardness and wear depth measurements and comparing with uncoated substrates under three-body abrasion wear. These properties were analyzed/mapped against probable deformation scenarios for nano-scale yield strength determination using the combined experimental nanoindentation load-depth curve method and computational expanding cavity models (ECMs). Obtained yield strength with key coating parameters like hardness and Young’s modulus were taken for modeling and simulation of strain-hardening effect under a peak loading of 165 mN in ABAQUS finite element (FE). Results from both combined experimental/computational and FE approaches indicate a progressive elasto-plastic mode being the dominating coating deformation mechanism with a strain hardening exponent of 0.15, under the studied loads.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
